SAFE 360 - CBRN Filtration System
SAFE 360 is professional and certified CBRN (chemical, biological, radiological and nuclear) air filtration and ventilation system designed for small size protected spaces like safe rooms, residential shelters, bunkers, containers and other for providing fresh filtered air and creation of protected environment in the intended area.
Highlights
-
Tested and certified for compliance to requirements of SI4570 standard
-
Approved by Civil Defence Command
-
Installed in tens of thousands of shelters
-
Complete system – blast valve, prefilter, electric blower, manual backup blower, CBRN filter, case and hoses, overpressure valve with airflow indicator.
-
Very cost-effective
-
Simple Installation and operation
-
Electric operation: 100-240 VAC or 12 VDC
-
Manual backup included in case of electric outage.
Installation Examples
Operation of SAFE 360
Operation in CBRN Filtration Mode
Operation in Ventilation Mode
SAFE 360 Components
Main Components
-
CBRN filter (combined carbon + HEPA filter)
-
Electric Blower
-
Converter from DC to AC
-
Manual backup
-
Blast valve with prefilter
-
Overpressure blast valve with airflow indicator
-
Decorative case + wall mounting bracket
-
Clean air hose
Technical Specifications
Item | Value | Unit |
|---|---|---|
BLAST VALVE (BVNO 50 4L) | ||
Returned Pressure durability | >900 (9) | kPa (bar) |
Pressure drop (Ventilation mode) | 200 | Pa |
Pressure drop (Filtration mode) | 95 | Pa |
CBRN FILTER (AFU 36) | ||
Airflow rate (nominal) | 36 | m³/h |
Initial Pressure Drop @ nominal | 460 | Pa |
Total filter weight | 7 | kg |
Mechanical filtration efficiency | ≥99.995 | % |
ELECTRIC BLOWER (EBL 180) | ||
Airflow (Ventilation mode) | 54 | m³/h |
Airflow (CBRN filtration mode) | 36 | m³/h |
Static Pressure (Filtration mode) | 720 | Pa |
Static Pressure (Filtration mode) | 980 | Pa |
Electric motor / Adapter voltage | 12 DC / 100-240 AC | V |
Electric motor current | 3,3 | A |
Manual operation (backup) | 1 | Person |
Frequency | 50/60 | Hz |
OVERPRESSURE BLAST VALVE (BVNC 40) | ||
Returned Pressure durability | >900 (9) | kPa (bar) |
Pressure drop (Ventilation mode) | 225 | Pa |
Pressure drop (Filtration mode) | 65 | Pa |
SAFE 360 Installation Options
Option I
Installation of the blast valve (air entrance) under the case.
Option II
Installation of blast valve (air entrance) aside the case.
Preparation for Installation
For installation of the blast valve (air entrance) and overpressure valve (air exhaust) which included in the SAFE 360 kit required having 4" flanges and air opening for pulling fresh air and release of air from the shelter. Flanges are usually comes as part of wall sleeves which are casted in concrete or as a retrofit part connected to the existing walls. See explanation below.
Wall Sleeve
Casted in concrete in process of construction of the structure
Retrofit Flanges for installation on existing walls
Important notice: in this configuration only Option II - Installation of blast valve (air entrance) aside the case posible.
It is recommended that the shelter will be tested for airtightness prior installation of the system. SAFE 360 allows to create overpressure (positive differential pressure) in the gas tight shelter, what helps to prevent penetration of contamination through small cracks or opening in the shelter perimeter.